Here are some quick instructions on upgrading the memory in an Acer Aspire Revo PC.
Unscrew the screw in the case (its where the stand goes). This will void your
warranty as you have to break the seal of the sticker.
Gently prise the case apart - you will need a knife or something similar to
stick between the two sides. Once you have wiggled it a bit, you should be able to pull the top off - just be careful.
It's fairly obvious where the RAM goes: -
Plug in the RAM module - it goes in at a slight angle - make sure it goes all the way in before locking it in place - the clips should go over the tabs at the side.
Here's what it looks like with the RAM installed: -
Then re-assemble the case.
Subscribe to:
Post Comments (Atom)
-
VirtualBox 3.2.10 gives me the following error message when booting Ubuntu 10.10:- piix4_smbus 0000.00.07.0: SMBus base address uninitializ...
-
PSPad is a great editor for programmers. Instead of using a dedicated Python IDE, PSPad can be tweaked to compile and run scripts directl...
-
If you have a Roku 2 media streamer and use a wireless network scanning tool such as Acrylic Wi-Fi Home, you might see a hidden wi-fi networ...
No comments:
Post a Comment